10ml Eye Drop Liquid Filling Machine
Automatic Eye Drop Bottle Filling and Capping Machine Line
Description:
This liquid filling and capping machine uses a microcomputer to set the number of steps peristaltic pump to perform metering filling (ceramic pump is used in special occasions), and is used for the production of a new generation of daily chemical and pharmaceutical pastes. Products required by GMP. It can also be used for small-dose liquid filling and capping production in other industries.
This machine is suitable for automatic filling, capping f 10ml round and flat plastic bottles and glass bottles. It has the advantages of accurate positioning, stable transmission, accurate measurement and simplicity. Filling measurement is accurate, no leakage, no bottle no filling; automatic outer cover, no bottle no inner stopper, outer cover; PLC programmable control, touch screen man-machine interface system, simple and convenient operation; inner stopper hopper and outer cover The hopper adopts single-track and double-track feeding, depending on the user's output.
Bottle unscambler
Plastic bottle unscrambler is used for plastic round, shaped or square bottles unscrambling equipment. No matter what the status of the bottle feeding, the machine can automatically complete the bottle feeding, bottle unscrambling, flip, arranging, bottle output, and connected with later packaging equipment.
* The storage bottle has a large capacity of 0.5m3, and a 15ml bottle can hold about 8,000 bottles at a time, for example, and the continuous operation time is more than 30 minutes.
* Electronic speed regulation, with photoelectric control device, the unscrambler can automatically stop supplying bottles when the bottle is blocked in the subsequent process, and the unscrambler will automatically feed the bottle when there is no bottle in the subsequent process.
* The whole machine has a closed structure and stable operation. Adopt acrylic plexiglass cover, pneumatic control by gas spring, simple and convenient, sealed and dustproof.
* It has a photoelectric detection control device, which can detect the inverted bottle and use the blowing device to remove it.
* With motor overload protection function. Polyethylene plastic bottles are suitable for unscramble bottles.
* Equipped with Siemens frequency converter. The unscramble speed is adjustable within the range of 10-150 bottles/min. The chances are over 99.9%. Noise <70dB.
* The messy bottles can be sorted into a state where the mouth of the bottle is uniformly upward and sent to the next process without pouring the bottle or manually placing the bottle.
* Electronic speed regulation and photoelectric quantitative control are adopted to ensure the bottle feeding volume of the unscrambled flower plate and improve the production efficiency.
* Wide range of use, round bottles, square bottles, flat bottles and irregular bottles to a certain extent.
Parameters:
| No. | Items | Parameters |
| 1 | Production capacity | 60-80 bottles/minute (it can be customized) |
| 2 | Bottle size | 10ml |
| 3 | Power Supply | AC220V/50Hz |
| 4 | Total Power consumption | 0.50KW |
| 5 | Air source | 0.3~0.6Mpa |
| 6 | Overall size（LxWxH） | 1100x1740x1200mm |
| 7 | Weight | 337Kg |
Eye Drop Filling and Capping Machine
The filling and capping machine is a new product developed by our company in recent years. It uses a microcomputer to set the number of steps peristaltic pump to perform metering filling (ceramic pump is used in special occasions), and is used for the production of a new generation of daily chemical and pharmaceutical pastes. Products required by GMP. It can also be used for small-dose liquid filling and capping production in other industries.
This machine is suitable for automatic filling, capping of 10ml round and flat plastic bottles and glass bottles. It has the advantages of accurate positioning, stable transmission, accurate measurement and simplicity. Filling measurement is accurate, no leakage, no bottle no filling; automatic outer cover, no bottle no inner stopper, outer cover; PLC programmable control, touch screen man-machine interface system, simple and convenient operation; inner stopper hopper and outer cover The hopper adopts single-track and double-track feeding, depending on the user's output.
Features:
* Microcomputer setting, piston pump to perform filling, material contact parts are all high-quality 304 stainless steel, disinfection-free, corrosion-resistant, and high-temperature resistant.
* The speed of the main engine can be adjusted by stepless frequency conversion.
* Automatic quantitative control of production volume.
* The filling execution and the system have the function of sucking back, and the liquid has no dripping.
* Automatic display technology function, speed can be adjusted at will.
* Adopt photoelectric control, no bottle no filling, no capping, no capping. Pouring bottle alarm system
* Fixed torque screw cap, reliable cap screwing quality, no looseness.
* One machine automatically completes filling, plugging, capping and capping, with fast speed and high degree of automation, which greatly saves labor costs.
* Color touch screen display, PLC control system. ...
* Automatic stop function, it can stop automatically when there is continuous no filling and no inner plug on any track.
* After filling, when entering the next station, the manipulator will cover it. The capping adopts a manipulator type working cam to rotate the vacuum suction plug cap. The mechanical cam controls the lifting, and the mechanized operation drives the manipulator to stopper and cover, which has the characteristic of no bottle and no outer cover.
* The capping part adopts constant-torque double-head high-speed capping, and is equipped with an automatic slipping device for tightening, which will not scratch the bottle cap; the bottle does not follow the rotation, and the turntable will not scratch the bottle body, which effectively guarantees the beauty of the packaging material. Touch screen control (the whole machine is controllable), with alarm prompt function.
* Work flow: Automatically feed the bottle to the station-automatic rotation-automatic quantitative filling-automatic stoppering and plugging-automatic closing and capping (vibration feeding)-automatic capping-finished product Conveyor belt output.
Parameters:
| No. | Items | Parameters |
| 1 | Power supply | 220V/50Hz |
| 2 | Power consumption | 1.5Kw |
| 3 | Air source | 0.4-0.6MPa |
| 4 | Filling head | 4 |
| 5 | Filling volume | 10ml |
| 6 | Measurement accuracy | ≤±1% |
| 7 | Production capacity | 40-50 bottles/min |
| 8 | Dimensions | 2400*1100*1500mm |
| 9 | Machine weight | 550kg |
